Having agreed everything with Baz at the end of September, we talk with the Yacht Harbour staff as he’ll need to be able to have access to both sides of the boat.
The North arm of the Tidemill, where we’re moored, will be dredged this winter, so we’ll have to move to the South arm at some point in the autumn. Bill, a bit further down from us, is going to move round in early October, and is happy for us to have his ‘corner’ berth.
With everything planned for laying up, we drive home for Bev’s birthday, returning a week later. It’s not just laying up that’s to be done, Steve’s determined to get a backrest for his bunk in place before we go back to Derbyshire again, and make templates for the area behind the chart table and other ‘flat surfaces’.
Woodworking is more of a challenge without the tent, but he’s set the ‘Workmate’ up on the pontoon and manages pretty well – but there’s more scope for accidents, with one or two items slipping into the water! He borrows a ‘Seasearcher’ from Henry one day and finds not only the small plane but a large drill lost a couple of weeks ago!
While he’s working on the interior, there’s no room for Bev, so she’s happy to go out visiting and finding other things to do in the area (including the shopping to make sure there’s always something good to cook for supper). She’s also the one who ensures we can fit everything into the car – quite a challenge this time with the mainsail and toolboxes as well as bits of wood to take home!
We motor round to Bill’s berth on 16 October and make her secure, enjoying a last night in this new spot, before driving home to tidy the house up for a long weekend with Katie, Giacomo and Roberta, travelling ‘up north’ for half term.
People keep asking when we’re going out sailing . . . and there’s always an excuse! Tide is wrong, still fitting out, too much wind, no wind, rig isn’t ready, mainsail isn’t bent on yet, no time to get out/in over the Tidemill bar, we’ve got to be in Derbyshire . . . Is what Rik said proving to be true? ‘Now we will find out if Steve is a boatbuilder or a sailor!’ Or is it Bev, who quite likes pottering around in Woodbridge and the surrounding area?
After ten years in the tent and the van, there are lots of reasons for us to just enjoy being on our boat, in the water, doing the ‘fitting out’ and getting her ‘shipshape’. Actually living on her this summer, without needing to have the van as a ‘back up’, has been great! Her interior is really taking shape. We’ve had lots of visitors, and can repay some of the hospitality we’ve had over the past ten years. But, she’s a sailing boat, not just a houseboat, and we have got some lovely new sails. So we check the tides and go for a night out in the river on a calm weekend 28-29 September. Thankyou, Bill, for the loan of your mooring buoy at Ramsholt. On Saturday morning, who did we see but ‘Kestrel’, sailing downriver and surprised to find us out of the Tidemill at last!
We needed to be back in the Tidemill to meet Baz on Saturday afternoon to discuss the winter covers, measure up and plan a schedule for getting everything done before the weather turns. Decisions made and schedule agreed, we’re going to bring all the sails home for winter storage and store the gaff and bowsprit on the deck. Bringing the anchor into the forepeak will mean we can have a fully fitted cover fore and aft with zipped doorways both sides of the cockpit, as we’ll want to come down during the winter.
We’ve commissioned a full-size winter cover from Baz Brackenbury of Woodbridge, but really need a new boom tent as well and covers for the hatch and coachroof. Bev decided to experiment with Mum’s old sewing machine and acquired some offcuts of Sunbrella for the purpose. After several attempts, and lots of online research, she decided it was worth a try and ordered 20m of Sunbrella from Parker & Kay Sailmakers at Suffolk Yacht Harbour along with the polyester thread and double-sided tape.
Once it arrived, the sewing machine seemed less happy about the ‘real thing’, but eventually, with help from Joe and a Derbyshire sewing machine mechanic, she learned how to adjust the settings to sew through the thickness! Cutting out meant clearing the kitchen floor for a large enough space, and sewing the long seams was quite a challenge, with it draped down the stairwell, but the job’s done and Baz will hopefully provide some guidance for the ‘final touches’, as we won’t be using it until next season now.
The smaller covers were much less of a challenge and after a first fitting, and finishing off ‘on site’, they look very smart, protecting the varnish and, in the case of the coachroof, keeping the rain out.